Fixed: Xhorse Dolphin XP005L Error Code: 80/84 Initialize Issue
Problem: The Xhorse Dolphin XP005L key cutting machine was failed to initialize. It gave me 2 error codes as below: "ERROR CODE: 80, Device initialize error." "ERROR CODE: 84, Z axis step motor initialize exception" What's going on? Please help. Solution Methods 1. Re-upgrade the machine. Methods 2. Use the mobile hotspot to try. Methods 3. If the above two methods don't fix the problem, you can only replace the PCB board. Note: You can see the PCB board by taking apart the device casing. Before replacement, you can take a picture, then refer to the picture to change the plugs one by one. Technical support www.xhorse.co.uk