Xhorse Dolphin XP 005

This post will guide you on how to use Dolphin XP-005 and Key Tool Max to cut a BMW key by code. First, Open the Key Tool Max and select "All Key Lost" >> "BMW". Then enter your BMW key code as required. According to the tips, install the M2 clamp and place the blank key as in the picture. Then select "Cut key" on Key Tool Max to cut the key. After a few minutes, the cutting is complete. Then we turn the blank key to the other side to cut and select "Cut Key" again to start. Cutting key complete! www.xhorse.co.uk

Today I'm gonna show how to cut a KIA3R for KIA Sephia with all keys lost with Xhorse Dolphin XP-005 Key Cutting Machine . In the process, I'll need to use M5 Clamp and make sure it is installed properly before cutting. Next, I'll need to decode with the LISHI tool to get bitting code 21122311 and key code Y2263. Once we've got them all, we can start cutting keys. Open the Xhorse app to remote control: All key lost >> Kia >> Y2263 >> KIA3R M5-A Clamp shoulder align. This type recommends using 1.5mm to cut. Cut key >> Cut The Dolphin XP-005 machine will start cutting... Just wait until completed. Once Dolphin stopped, take out the key for a test. It can smoothly open the door lock. Done. www.xhorse.co.uk