Xhorse Dolphin XP 005

Some users don’t know the right way to place a key blank on Xhorse Key Cutting Machine clamps. Considering misplacement may cause key moving or cutter failed to cut keys. Below we will demonstrate the correct position to install a key blank. Question If I was putting key blank on Dolphin XP-007 clamp like this, in front, the cutters cannot touch both keys. But in the back, both can be touched. Xhorse.co.uk replies 1.Please notice to place key blank on the upper stair. It’s wrong position to put into bottom groove. 2.Remember to tighten key blank to fix it on. The left upper groove is also workable. Attached the correct key placement location on Dolphin II M5 clamp. Most Xhorse key cutting machines are follow the same way. Hope this is helpful. http://blog.xhorse.co.uk/right-way-to-place-key-blank-on-xhorse-key-cutting-machine-clamp/

Xhorse Dolphin II XP005L can support to cut 2012 Ford Focus HU101 all keys lost successfully. It’s a blade key. Having decoded its lock to get key code, let’s do it with all key lost function. Key code: 11067 Press on touch screen:  All key lost >> Ford >> Enter key code: 11067 >> HU101 Install the key blank on M5 clamp side A, tip align 5th position. OK >> Cut key Dolphin 2 will start up processing the first side of the key. Just wait until cutting finished. Go ahead and get the chips off. Then flip it to cut the second side. Cutting completed. Take out the key to have a try. It can open the lock and work perfectly. This is how to use Dolphin XP005L automatic machine to cut a HU101 key when all keys lost. For more key cutting machines, welcome to check on www.xhorse.co.uk http://blog.xhorse.co.uk/xhorse-dolphin-ii-xp005l-cut-ford-hu101-all-key-lost-success/

This is an initial guide of Xhorse Dolphin II XP005L to solved the frequent questions from new users. Including Xhorse account activation, firmware & database upgrade, probe & cutter installation, key placement position. How to activate Dolphin II XP005L? 1.Turn power on. Select language >> Start to activate >> Agree to enter >> Connect to WiFi, next. 2.Download Xhorse app on a phone firstly, then scan the QR code and press “Activate” to combine device. (You’ll receive a security code, just fill in) Activated successfully. Now you’re ready to start to use. How to update Dolphin II firmware & database? Enter into “System >> Update Center >> Firmware Update/ Database Update >> Update”. (Red dots on left mean latest software is available). Make sure the Internet is well. Just wait it processing until completed… All can be done on Dolphin Key Cutting Machine, no need a PC anymore. How to install Dolphin II probe & cutter? Install Probe...