Xhorse Dolphin XP 005

Problem: The XHORSE DOLPHIN XP-005 could not decode the original key when I selected the HU100 option. The machine stopped and gave the prompt: "Error code: 2, probe not detected. Please do the following steps: 1. Check the clamp position is correct; 2. Check the key insert properly, no chips" Solution The image provided shows that the key is clamped in the wrong groove. Remove the key up to the 1st step as a diagram, and the problem can be solved. Technical Support E-mail: Sales01@Xhorse.co.uk Skype: service@xhorse.co.uk Whatsapp: +86 17308368390 www.xhorse.co.uk

Hello you guys! This is a door lock removed from the 2014 Lexus IS250. We're making the emergency key which is a single-sided cut key with Xhorse Dolphin XP-005 machine . The key code on the lock is 88737. My key book, says the 2014 IS250 code series is between 80000-89999. So our key code 88737 is correct. It's an A8 cut and converts 1233 to 3131. This is a single-sided key and opens the lock one way. So we're using our little shim to level it up when key cutting. In this way, the Dolphin XP005 probe can read the key. Cause if it doesn't have a shim underneath it or it's not higher, Xhorse Dolphin will give you an error code. We're using Clamp M2 on side A. The shim should be put to the tip. Put the key right on the top of the shim, then tighten it. As you can see, the Dolphin probe can read and cut the key successfully. That's how easy it is to cut a 2014 Lexus IS250 single-side emergency blade. If you have that shim, it'll make your job more easier. ...