Xhorse Dolphin XP 005

In this article, we learn how to complete setting instructions on Xhorse Dolphin XP-005L cutting machine .  Step 1. Power on Xhorse Dolphin XP005L Power on Xhorse Dolphin XP005L, raise the tablet, lift up the protective cover.  Step 2. Dolphin XP005L Cutting Setting. Select "System" -> Machine Parameter -> Cutting Setting (Spindle speed: Medium; Move speed: Medium, Cutter diameter: 1.5mm; Led status: white, buzzer switch: open, then click on "Save".  Step 3. M1 / M2 Clamp Calibration 1. M1 Clamp Calibration Insert the probe and the cutter to the top. (There's no need for height adjustment) . Back to "System", then "Machine Parameter", then " M1 Clamp calibration" , please make sure the key stick to the first mark line, then click on "Start", clamp calibration completed.  2. M2 Clamp Calibration Make sure Side A is upwards. Go to "System", then "Machine Parameter", then " M2 Clamp calibration...

This article is to guide you on how to perform Cutting calibration on Xhorse Dolphin XP-005L key cutting machine .   Before performing Cutting calibration, you need to follow these steps:   Part 1. Use smart phone APP to connect the machine 1. Download Xhorse APP in the App Store to obtain it, or directly scan the QR code as shown below. 2. Power the machine and turn it on, open Xhorse APP, switch to the CNC machine interface, click on "Switch Device" and select Dolphin II. 3. Click on "Select" and turn on Bluetooth, click the SN of the device to connect to the machine. Part 2. Dolphin XP-005L Cutting calibration 1) Click on "System" on the operation main interface 2 ） Click on "Machine Parameter". 3 ） Click on "Cutting calibration" 4 ） Please select the diameter of the milling cutter that you installed. 5 ） Operate by following the tips and clicking on "Start". Do not use the key that ...