Xhorse Dolphin XP005L Copy a Citroen VA2T Key Success

Xhorse Dolphin XP005L Key Cutting Machine is able to copy a Citroen VA2T key in minutes successfully. By decoding an original key to cut a new key, this is very simple. Following I'm gonna show how to do.

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-1

Procedure 

Vehicle database >> Citroen >> All key blank >> VA2T

Rotate M5 clamp to side B.

Put the original key tip align 2nd position.

OK >> Decode key

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-3

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-3

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-4

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-5


Dolphin 2 starts reading the key...

Wait until decoding completed.

You'll find key bitting have been read out on screen.


Remove the original key, and change to a new key blank.

Press "Cut key >> Cut".

Dolphin 2 will start working again, this time it's cutting key...


Turn over the key once cutting side was done.

Just repeat same operation to cut the second side.

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-6

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-7

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-8

Clean and take out the key when both sides were completed.

As you can see, it's same as the original one.

It can open the lock.


Key cutting is successful!

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-9

xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success-10

For more Key Cutting Machine tutorials to be updated.

http://blog.xhorse.co.uk/xhorse-dolphin-xp005l-copy-a-citroen-va2t-key-success/


Comments

Post a Comment

Popular posts from this blog

(Fixed) Xhorse Dolphin XP005 cannot be updated and stuck in bios mode

Image
Customer problem: Trying to do an update on my Dolphin XP-005 and it keeps failing. I've done repair 1 and repair 2 still not updating and the machine says bios. Solution: 1. Reinstall the upgrade kit 2. Switch to a new USB cable 3. Check if the network condition is good 4. If none of the above methods can solve your problem, please contact the seller Customer feedback: I used a new cable and it works now. Thank you. For more technical support, please follow http://blog.xhorse.co.uk/
Read more

How to use Dolphin XP-005/XP-005L to Cut Plastic Key HU66

Image
This article will guide you on how to use Xhorse Dolphin XP-005/XP-005L to cut plastic keys. Let's take HU66 as an example. Part 1. Use Dolphin XP-005 to cut Choose "Vehicle Database" >> "Skoda">> "Fabia" >>"HU66" Follow the prompts. Key fixed: Clean metal filings and use your finger to press the blank key on the clamp and make sure it is flat. Enter the bitting code: 12311324, then choose "Plastic key/Aluminum key cutting" to continue. Then cut the key according to the prompt and it's done! Part 2. Use Dolphin XP-005L to cut Different from XP-005, the M5 clamp equipped with XP-005L does not have the "Plastic key/Aluminum key cutting" option, so you need to use the metal key to locate, then click pause after the milling cutter rotation, then put the plastic key in and click continue. For more technical services about Dolphin xp 005/xp005l cutting machine, please follow http://blog.xhorse.co.uk/
Read more

How to Micro-adjust biting distance and cutting depth for Dolphin XP005

Image
This post explains how to Micro-adjust biting distance and cutting depth for the Xhorse Dolphin XP005 key cutting machine via Xhorse App. Sometimes the key biting doesn’t reach our demand, so in Dolphin XP005 we get such an option to adjust it. Before performing Cutting Key in Xhorse App, we should prepare the following steps: 1. Click “Parameter Micro-adjust”, select the specific biting position;  2. After adjusting, click “Cut by single-biting”; 3. Select a correct code >> Select this biting >> Continue; 4. Start cutting processing, and wait… 5. The blade will only cut the code we just selected, now 100% completed! The function works perfectly.  As you seen, the function of Micro-adjust biting distance and cutting depth on Xhorse Dolphin XP005 can better meet the requirements of cutting keys. The operation is quite fast and easy without worries. Xhorse Tech Support: https://www.xhorse.co.uk/
Read more