Xhorse Key Tool Max + MINI OBD Tool Program 2015 Peugeot 208 AKL

This is a 2015 Peugeot 208 with all keys lost. Having decoded & cut out the HU83 with the Dolphin XP-005 machine, let's go on programming the key. I'll use Xhorse Key Tool Max + MINI OBD Tool to finish the job.

key-tool-max-mini-obd-tool-program-peugeot-208-akl-1

key-tool-max-mini-obd-tool-program-peugeot-208-akl-2

key-tool-max-mini-obd-tool-program-peugeot-208-akl-3

Read PIN Code

Plug Mini OBD Tool into OBD2 interface.

Turn ignition on.

Switch to Mini OBD function page:

Immo programming >> Peugeot >> Password reading >> Type 1 CAN(all key lost or adding) >> Execute >> IMMO password reading


This function will cause wiper to move, which is normal.

Turn on the double flash indicator.

Open then close the driver door once.


The PIN code for this car is: TKNY

Turn on ignition once, then program key.

key-tool-max-mini-obd-tool-program-peugeot-208-akl-4

key-tool-max-mini-obd-tool-program-peugeot-208-akl-5

key-tool-max-mini-obd-tool-program-peugeot-208-akl-6

Program Key

Go back to Select by model >> Start executing >> Key programming

Turn on the ignition switch!

Enter 4-digit password: TKNY


Please complete the following operations within 15s:

Turn off the ignition switch, then turn on the ignition switch!

Press "Confirm" after completing.


Programmed successfully.

Press "Yes" to program next one.

Insert new key and turn on ignition switch!

Programmed successfully.

Press "No" to complete.

VVDI Key Tool Max will display the steps to reprogram, read it if in need.


Take out the 2 keys, both can perfectly work.

Done.

key-tool-max-mini-obd-tool-program-peugeot-208-akl-7

key-tool-max-mini-obd-tool-program-peugeot-208-akl-8

key-tool-max-mini-obd-tool-program-peugeot-208-akl-9

key-tool-max-mini-obd-tool-program-peugeot-208-akl-10

http://blog.xhorse.co.uk/xhorse-key-tool-max-mini-obd-tool-program-2015-peugeot-208-akl/

Comments

Post a Comment

Popular posts from this blog

(Fixed) Xhorse Dolphin XP005 cannot be updated and stuck in bios mode

Image
Customer problem: Trying to do an update on my Dolphin XP-005 and it keeps failing. I've done repair 1 and repair 2 still not updating and the machine says bios. Solution: 1. Reinstall the upgrade kit 2. Switch to a new USB cable 3. Check if the network condition is good 4. If none of the above methods can solve your problem, please contact the seller Customer feedback: I used a new cable and it works now. Thank you. For more technical support, please follow http://blog.xhorse.co.uk/
Read more

How to use Dolphin XP-005/XP-005L to Cut Plastic Key HU66

Image
This article will guide you on how to use Xhorse Dolphin XP-005/XP-005L to cut plastic keys. Let's take HU66 as an example. Part 1. Use Dolphin XP-005 to cut Choose "Vehicle Database" >> "Skoda">> "Fabia" >>"HU66" Follow the prompts. Key fixed: Clean metal filings and use your finger to press the blank key on the clamp and make sure it is flat. Enter the bitting code: 12311324, then choose "Plastic key/Aluminum key cutting" to continue. Then cut the key according to the prompt and it's done! Part 2. Use Dolphin XP-005L to cut Different from XP-005, the M5 clamp equipped with XP-005L does not have the "Plastic key/Aluminum key cutting" option, so you need to use the metal key to locate, then click pause after the milling cutter rotation, then put the plastic key in and click continue. For more technical services about Dolphin xp 005/xp005l cutting machine, please follow http://blog.xhorse.co.uk/
Read more

How to Micro-adjust biting distance and cutting depth for Dolphin XP005

Image
This post explains how to Micro-adjust biting distance and cutting depth for the Xhorse Dolphin XP005 key cutting machine via Xhorse App. Sometimes the key biting doesn’t reach our demand, so in Dolphin XP005 we get such an option to adjust it. Before performing Cutting Key in Xhorse App, we should prepare the following steps: 1. Click “Parameter Micro-adjust”, select the specific biting position;  2. After adjusting, click “Cut by single-biting”; 3. Select a correct code >> Select this biting >> Continue; 4. Start cutting processing, and wait… 5. The blade will only cut the code we just selected, now 100% completed! The function works perfectly.  As you seen, the function of Micro-adjust biting distance and cutting depth on Xhorse Dolphin XP005 can better meet the requirements of cutting keys. The operation is quite fast and easy without worries. Xhorse Tech Support: https://www.xhorse.co.uk/
Read more