Xhorse Dolphin + VVDI Key Tool Max Pro Cut TOY40 by Code

As you can see, the cylinder is really easy to pop out: 87358, so I don't have to decode them. Next, I'm gonna use Xhorse Dolphin XP005 + Key Tool Max Pro to cut a Toyota TOY40 emergency key by this code. Let's see what will happen.

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-1


Cut by bitting >> Toyota >> 87358 >> OK

Install the key blank on M5 clamp B side 2 position as prompted.

The key bitting codes are 4113, and 1412.

Just write them down.

Cut key >> Continue

The Dolphin XP005 failed with an error code: 2, "Not detected probe".

It was asked to do the following steps:

1. Check the clamp is correct.

2. Check height level adjustment finished.

3. Check clamp calibration finished.

4. Check the key insert properly, no chips.


This didn't used to happen. I think this is a result of maybe an update. Remember to keep your Key Tool Max Pro updated to fix the bug.

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-2

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-3

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-4

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-5

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-6

Let's leave it alone and try another way:

Vehicle database >> Toyota >> TOY40, 4-bittings >> OK >> Enter bitting codes: 4113, 1412 >> Cut key >> Continue

Xhorse Dolphin can complete the cutting this time.


Take out the key to have a test.

It does work.

Done.

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-7

xhorse-dolphin-vvdi-key-tool-max-pro-cut-toy40-by-code-8

www.xhorse.co.uk

Comments

Post a Comment

Popular posts from this blog

(Fixed) Xhorse Dolphin XP005 cannot be updated and stuck in bios mode

Image
Customer problem: Trying to do an update on my Dolphin XP-005 and it keeps failing. I've done repair 1 and repair 2 still not updating and the machine says bios. Solution: 1. Reinstall the upgrade kit 2. Switch to a new USB cable 3. Check if the network condition is good 4. If none of the above methods can solve your problem, please contact the seller Customer feedback: I used a new cable and it works now. Thank you. For more technical support, please follow http://blog.xhorse.co.uk/
Read more

How to use Dolphin XP-005/XP-005L to Cut Plastic Key HU66

Image
This article will guide you on how to use Xhorse Dolphin XP-005/XP-005L to cut plastic keys. Let's take HU66 as an example. Part 1. Use Dolphin XP-005 to cut Choose "Vehicle Database" >> "Skoda">> "Fabia" >>"HU66" Follow the prompts. Key fixed: Clean metal filings and use your finger to press the blank key on the clamp and make sure it is flat. Enter the bitting code: 12311324, then choose "Plastic key/Aluminum key cutting" to continue. Then cut the key according to the prompt and it's done! Part 2. Use Dolphin XP-005L to cut Different from XP-005, the M5 clamp equipped with XP-005L does not have the "Plastic key/Aluminum key cutting" option, so you need to use the metal key to locate, then click pause after the milling cutter rotation, then put the plastic key in and click continue. For more technical services about Dolphin xp 005/xp005l cutting machine, please follow http://blog.xhorse.co.uk/
Read more

How to Micro-adjust biting distance and cutting depth for Dolphin XP005

Image
This post explains how to Micro-adjust biting distance and cutting depth for the Xhorse Dolphin XP005 key cutting machine via Xhorse App. Sometimes the key biting doesn’t reach our demand, so in Dolphin XP005 we get such an option to adjust it. Before performing Cutting Key in Xhorse App, we should prepare the following steps: 1. Click “Parameter Micro-adjust”, select the specific biting position;  2. After adjusting, click “Cut by single-biting”; 3. Select a correct code >> Select this biting >> Continue; 4. Start cutting processing, and wait… 5. The blade will only cut the code we just selected, now 100% completed! The function works perfectly.  As you seen, the function of Micro-adjust biting distance and cutting depth on Xhorse Dolphin XP005 can better meet the requirements of cutting keys. The operation is quite fast and easy without worries. Xhorse Tech Support: https://www.xhorse.co.uk/
Read more