Xhorse Dolphin II Cut New Style 2021+ Honda Emergency Key

Today we’ll cut a new 2021 Honda emergency key with Xhorse Dolphin II by bitting. The new 2021+ Honda smart keys have a new keyway that is real thin and double-sided. The OEM keys are steel, but we’re going to cut a brass key this time. Cause that’s a little easier on the cutter.

xhorse-dolphin-ii-cut-2021-honda-emergency-key-1

We’ve got the bidding code from a 2021 Honda lock: A35131, B354. The key has A and B sides with different slopes.


Cut by bitting >> SY >> OK

Follow the prompt to install the key:

Tip align 3rd align on M5 clamp A side.


Input the bitting code on screen: 35131

Cut key >> Cut

Dolphin 2 will start cutting A side automatically…

The cutting key was completed.

xhorse-dolphin-ii-cut-2021-honda-emergency-key-2

xhorse-dolphin-ii-cut-2021-honda-emergency-key-3

xhorse-dolphin-ii-cut-2021-honda-emergency-key-4

Turn over the key to cut B side.

Select to B axis on the top left corner, and input bitting code 354.

Cut key >> Cut

The Dolphin machine will start cutting the B side…


Take out the key when cutting is completed.

It works perfectly.

So we’ve successfully got a new Honda emergency key.

xhorse-dolphin-ii-cut-2021-honda-emergency-key-5

xhorse-dolphin-ii-cut-2021-honda-emergency-key-6

www.xhorse.co.uk

Comments

Post a Comment

Popular posts from this blog

(Fixed) Xhorse Dolphin XP005 cannot be updated and stuck in bios mode

Image
Customer problem: Trying to do an update on my Dolphin XP-005 and it keeps failing. I've done repair 1 and repair 2 still not updating and the machine says bios. Solution: 1. Reinstall the upgrade kit 2. Switch to a new USB cable 3. Check if the network condition is good 4. If none of the above methods can solve your problem, please contact the seller Customer feedback: I used a new cable and it works now. Thank you. For more technical support, please follow http://blog.xhorse.co.uk/
Read more

How to use Dolphin XP-005/XP-005L to Cut Plastic Key HU66

Image
This article will guide you on how to use Xhorse Dolphin XP-005/XP-005L to cut plastic keys. Let's take HU66 as an example. Part 1. Use Dolphin XP-005 to cut Choose "Vehicle Database" >> "Skoda">> "Fabia" >>"HU66" Follow the prompts. Key fixed: Clean metal filings and use your finger to press the blank key on the clamp and make sure it is flat. Enter the bitting code: 12311324, then choose "Plastic key/Aluminum key cutting" to continue. Then cut the key according to the prompt and it's done! Part 2. Use Dolphin XP-005L to cut Different from XP-005, the M5 clamp equipped with XP-005L does not have the "Plastic key/Aluminum key cutting" option, so you need to use the metal key to locate, then click pause after the milling cutter rotation, then put the plastic key in and click continue. For more technical services about Dolphin xp 005/xp005l cutting machine, please follow http://blog.xhorse.co.uk/
Read more

How to Micro-adjust biting distance and cutting depth for Dolphin XP005

Image
This post explains how to Micro-adjust biting distance and cutting depth for the Xhorse Dolphin XP005 key cutting machine via Xhorse App. Sometimes the key biting doesn’t reach our demand, so in Dolphin XP005 we get such an option to adjust it. Before performing Cutting Key in Xhorse App, we should prepare the following steps: 1. Click “Parameter Micro-adjust”, select the specific biting position;  2. After adjusting, click “Cut by single-biting”; 3. Select a correct code >> Select this biting >> Continue; 4. Start cutting processing, and wait… 5. The blade will only cut the code we just selected, now 100% completed! The function works perfectly.  As you seen, the function of Micro-adjust biting distance and cutting depth on Xhorse Dolphin XP005 can better meet the requirements of cutting keys. The operation is quite fast and easy without worries. Xhorse Tech Support: https://www.xhorse.co.uk/
Read more